Traub TNK 36 metal lathe
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
Show
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Location: DE
Control Brand: TRAUB
Control Model: TX8i (64-bit)
Counter Spindle: Motor Spindle
Driven Tools: yes
Spindle Power: 10.7 kW
Through-spindle Coolant: yes
MDE Interface: Yes
Tool Monitoring: Yes
Rigid Tapping: Yes (without compensation chuck)
Main Spindle Bore: 36 mm
Main Spindle Drive Power: AC 6.7 / 10.7 kW
Top Turret Stroke X/Z: 50 / 100 mm
Rear Attachment Stroke X: 73 mm
Rear Attachment Stroke Y: ±50 mm
Main Spindle C-Axis: Yes
Hainbuch Change Parts: Yes
Hainbuch Setup Aid Base Body: Yes
Hainbuch Manual Change Device: Yes
Counter Spindle C-Axis: Yes
Counter Clamping Pressure Device: Yes
Workpiece Ejection Device: Yes
Hainbuch Axfix Chuck: Yes
Upper Tool Carrier: Yes
Electronic Gearbox: Yes
X3 Cross Axis for Front Unit: Yes
Front Unit: 5-position
Driven Tools on Front Unit: Yes
Cut-Off Side Machining Station: Yes
Driven Tools on Cut-Off Side Station: Yes
Workpiece Unloading Device: Gripper
Coolant Tank Capacity: 230 l
Coolant Pressure: 7 bar
Coolant Flow Rate: 50 l/min
Internal Coolant Supply: 30 bar
High Pressure Coolant: 120 bar (front and rear machining station)
Coolant Filter: Knoll VRF 150/750 Vacuum Rotary Filter
Suitable Materials for Filter: Aluminum, Plastic, Brass, Steel
Wash Gun: Yes
Connected Load: 22 kW
Maximum Bar Length: 3 m
Maximum Bar Diameter: 36 mm
Operating Voltage: 400 V, 3~, 50 Hz
Control Voltage: 24 V AC
Valve Voltage: 24 V DC
Clutch Voltage: 24 V DC
Total Installed Power: 33 kW
Total Rated Current: 60 A
Bar Feeder Year: 2003
Chip Conveyor Discharge Height: 950 mm
TECHNICAL DATA
ADDITIONAL EQUIPMENT OPTIONAL
FMB turbo 5-42 XT / 3200"C" Bar Feeder
Hinged Belt Chip Conveyor
Guide Tubes D25
D36
Running Workpiece Stop
Shank 16 × 16 mm
Brankamp CMS 100 Collision Monitoring