New Kontur 650 Coldplastic road marking machine
Warszawa
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 532 82...
Show
+48 532 821 483
Poland, Warsaw
Poland, Warsaw
Poland, Warsaw
Turkey
Turkey
Turkey
Turkey
Turkey
Turkey
Turkey
Turkey
Turkey
Bulgaria, Varna
Germany, Wendelstein
Germany, Wendelstein
Mexico, Chihuahua
Germany, Wendelstein
The marking unit is equipped with two quick-release applicators to apply single and double lines. A different applicator is used for each line type.
Cold plastic is mixed with hardener in the dynamic agitator immediately before applying marking lines. The components are dispensed automatically by variable displacement pumps.
Plastic consumption depends on the marking type and structured line pattern and ranges from 1.5 to 6 kg/m2. The marking unit with an applicator and a glass bead gun is mounted on the right side of the machine. The changeover time to the left side is 30 min, if done by 2 people.
Cleaning of the agitator and applicators is controlled from the operator panel and requires minimal attention from the support workers.
Retroreflective glass beads are applied on the lines directly during marking with automatic glass bead guns through adjustable diffusers.
The machine must be transported to the site on a low-frame trailer with a load capacity of at least 3.5 tons.
The machine is designed for use on roads in Europe, Siberia, and Central Asia and has a CE marking.
Standard Configuration:
- One set of applicators for flat or structured lines;*
- Two glass bead guns;
- Marking control panel;
- Foot pedal duplicating the “Start” button on the marking control panel;
- Hydraulic agitator in the plastic tank;
- Roof-mounted flashing lights;
- Spotlight for the marking unit;
- Operator workplace light;
- Marking unit light;
- Rear platform for a support worker and road cones.
Options:
- Additional applicators for flat and structured lines;**
- 40 cm single flat line applicator;
- Hydraulic drive for raising/lowering the aiming device;
- Remote button duplicating the “Start” button on the marking control panel;
- Joystick for switching modes of the control panel;
- “Pass This Side” sign (700 mm) on a swing arm or “Detour” cluster sign;
- Hydraulic powered sweeper.
*Sizes of standard configuration applicators to be specified when ordering.
**Sizes and quantity of additional applicators to be specified when ordering.
Specification Kontur 650HPE
Engine type Diesel
Engine power output, 44kW
Engine power, 61HP
Engine capacity, 2434cm3
Approval EU Stage IIIA (TIER 3)
Compressor Piston
Maximum operating road gradient, 20%
Maximum gradeability, 30%
Transport speed, 12km/h
Glass bead tank , 100l
Glass bead tank, 160kg
Control panel screen diagonal, inches 5,7
Pre-set programs Up to 24
Marking material (main / optional) Cold plastic
Maximum marking speed, 5km/h
Marking material quantity, 820kg
Hardener, 30l
Flushing liquid, 30l
Fuel tank capacity, 60l
Oil tank capacity, 80l
Lines applied simultaneously 2
Number of guns (applicators, extruders) 2
Double line width, 100, 120, 150mm
Single line width, 100, 120, 150, 200, 240mm
Overall machine dimensions (L x W x H), m:
- Operating position 7,500 x 2,200 x 2,600
- Transport position 4,500 x 1,600 x 2,400
Dry weight, 2700kg
Unladen weight, 2850kg
Total weight, 3900kg