723-19-11503 hydraulic control valve for Komatsu PC45MR-8 mini excavator
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+86 189 289...
+86 189 2896 5241
China
China
China
China
Product Overview
For a one‑machine contractor, a compact excavator is not a piece of equipment — it is the business. The PC45MR‑8, Komatsu's 4.5‑ton minimum‑radius model, is exactly that machine for many small crews: it digs the footing, trenches the service, backfills the trench and grades the yard, all in the same week. Its distributor, reference 723‑19‑11503, divides pump flow among boom, arm, bucket, swing and travel, and when the block drifts, the whole schedule drifts with it.
The failures are small in isolation and expensive in combination. The boom sinks while a bucket is held over a trench. The arm takes up slack at stroke start. House swing, always tight on an MR machine because it rotates within its own footprint, lands inconsistently. Tracks slow when the bucket is loaded. Each is a symptom of oil crossing between circuits past worn spools. This aftermarket distributor replaces the assembly complete with fresh internals set to Komatsu values, so the worn unit comes off and the replacement goes into the stock hose positions.
Core Advantages
1. Downtime matters most when the machine is the whole crew
There is no second unit to cover. A tested, bolt‑on assembly gets the machine back to work in a day rather than a week of workshop diagnosis.
2. Tight‑radius swing becomes predictable
MR machines rotate inside their own footprint, so swing accuracy has less margin. Restored circuit isolation puts the house where the operator stopped it.
3. Trench and footing work keeps its finish
Utility and footing passes are judged on clean edges. Renewed metering means the bucket stops where the lever stops it, without a trim pass.
4. Boom holds while the operator sets a pipe
A drifting boom forces constant pressure on the lever. Fresh spool pairs keep the load steady during placement.
5. Practical cost for a machine with a long working life ahead
Compact machines of this generation have years of service left. Replacing the block is the cheaper decision compared with losing weeks to a worn valve.
Manufacturing & Quality Control
Spool and bore pairs are machined to print, matched by size, and hand‑run‑in until full‑stroke movement is free of binding. Assembled blocks are flow‑tested circuit by circuit with relief values logged against the PC45MR‑8 figures; out‑of‑window units are stripped and corrected. Blocks ship internally oil‑fogged, ports capped, and packed in compact foam‑lined crates.
Frequently Asked Questions
Q1: How do I confirm 723‑19‑11503 suits my PC45MR‑8?
A: Send a photo of the tag on the existing valve with the machine serial number. Build variants exist across the MR‑8 run and we verify before dispatch.
Q2: What symptoms appear first on these compact machines?
A: Swing placement becomes inconsistent and the boom sags slightly on held loads. Both are easy to overlook until the trench edges start needing re‑work.
Q3: Is rebuilding my existing block a realistic option?
A: If the casting is sound and has never been rebuilt, a kit may restore it. For a sole machine, a complete tested assembly avoids the risk of a second failure. Photos help us judge.
Q4: What hydraulic servicing should accompany installation?
A: Flush the system, renew the return filter, clean the suction strainer, and refill with specified oil. Compact circuits are sensitive to debris.
Q5: Can this ship by express to reduce downtime?
A: Yes. A compact block travels well by air or express and usually arrives faster than sea freight on a single unit. Tell us the destination and we will quote the quickest route.
Q6: What is excluded from warranty?
A: Material and assembly faults are covered. Damage from dirty oil, water ingress, a spool forced against a bind, or reliefs altered outside specification is not. Photograph the packaging before opening if it arrives damaged.