New Wille Soil Triaxial test systems test bench
Pullach
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
Show
+49 89 38031644
Germany, Pullach
Germany, Pullach
Germany, Pullach
Germany, Location:düsseldorf
Germany, Location:munich
Germany, Pullach
Germany, Pullach
Germany, Pullach
Germany, Pullach
Germany, Pullach
Germany, Pullach
Germany, Location:nuremberg
Germany, Munich
Germany, Stuttgart
Germany, Pullach
Germany, Pullach
Germany, Pullach
Germany, Wuppertal
Germany, Stuttgart
Germany, Pullach
Manufacturer
Wille Geotechnik
Type of Machine
Soil Triaxial test system
Year of Manufacture
2023
Warranty
Valid until June 2026
Load Frame
Model: Universal table-top load frame UL-50
Maximum force: 50 kN
Spindle stroke: 100 mm
Feed rate stepless: less than 0.00001 to 60 mm/min
Integrated analogue ports: 6
Test space height: 1000 mm
Test space width: 360 mm
Dimensions W x D x H: approx. 550 x 556 x 1728 mm
Weight: approx. 130 kg
PC interface: Fast Ethernet RJ45
Supply voltage: 115/230 V
50/60 Hz
Controller: Siemens industrial controller
Triaxial Cell
Model: Triaxial cell with external rods
specimen diameter up to 100 mm
2 MPa
Max. confining pressure: 2000 kPa
Max. axial load: 50 kN
Max. sample size: 100 x 200 mm diameter
Approx. dimensions: 420 x 650 mm diameter
Transparent polymer cylinder reinforced with carbon fibre strips
Stainless steel piston with low friction guidance
5 volume change ball valves with hose connectors for 8/6 mm
Triaxial Cell Lifting Mechanism
Model: AN-1000 manual hand winch lifting and sliding mechanism for triaxial cell
Submersible Load Cells
5 kN submersible load cell for triaxial cells with confining pressure compensation
item
00401-A7-001
Dimension: 75 x 50 mm
accuracy 0.1%
output 0 to 10 V
1 kN submersible load cell for triaxial cells with confining pressure compensation
item
00401-A7-009
Dimension: 75 x 50 mm
accuracy 0.1%
output 0 to 10 V
Load Piston
Load piston diameter 25 mm for triaxial cell diameter 100 mm
with cable feedthrough for
submersible load cells
Precision Displacement Transducer
Measuring range: 0 to 50 mm
Repeat accuracy: less than 0.002 mm
Linearity: less than 0.25%
Protection class: IP 40
Temperature range: minus 30 to plus 100 degrees C
Volume and Pressure Controller — Syringe Pump VPC 10/300/2
Model: Automatic TWIN electromechanical stainless steel volume/pressure controller
model VPC 10/300/2
Max. pressure: 1000 kPa per pump
2 x 1 MPa total
Volume standard: 2 x 314 ml
Resolution: 0.00009 ml
Pressure resolution: 0.1 kPa
Pressure linearity: 0.1% full scale
Flow accuracy: 0.01% full scale
Max. volume flow: approx. 117 ml/min under max. pressure
Controller: integrated Siemens controller
0.03% closed loop accuracy
Voltage: 220 V
Communication: Ethernet port
ASCII or LabView protocol
Cell and Porewater Pressure Transducer
Measuring range: 0 to 1 MPa
Accuracy: less than 0.25% of range
Output signal: 0 to 10 V
Supply voltage: 13 to 28 V DC
Dimension: 30 x 70 mm
connection thread 1/2 inch
Flushing Device for Pressure Transducers
Specimen Adapter Sets
Adaptor set for specimen diameter 54 mm for triaxial cell 100 mm
AN-1000
Adaptor set for specimen diameter 75 mm for triaxial cell 100 mm
AN-1000
Each set includes: specimen base adaptor
top-cap with back pressure connections
connecting tubes with quick couplings
porous discs
O-rings
extension top cap with
vacuum connection
Sample Preparation Kits
Sample preparation kit for 54 x 100 mm sample size
AN-1000
Sample preparation kit for 75 x 150 mm sample size
AN-1000
Each kit includes: split formers for cohesive and non-cohesive materials
O-ring stretcher
suction sleeve device
100 pieces filter paper
20 membranes and 10 O-rings
Triaxial Test Software — GEOSYS Professional
Fully automatic multi-channel triaxial control and data acquisition software
Test stages: consolidation
saturation
B-value check
standard triaxial UU/CU/CD
stress
path
K0 tests
unsaturated conditions
Closed loop control of axial load
cell pressure
porewater pressure and all connected
transducers
Free programmable test sequences with formula editor and stop criteria
Uniaxial Compression Conversion Kit
Measuring stand for uniaxial compression tests and modulus of rigidity determination up to
100 kN
Suitable for sample heights 60 to 200 mm
sample diameter up to 100 mm
Permissible maximum load: 100 kN
Uniaxial Compression Software — GEOSYS
Item: 10105-A7-001
Fully automatic control and data acquisition software for unconfined compression tests
Simultaneous display of compressive strength
compressive strain and stress-strain
diagram
User Manuals
Full English language user manuals supplied on CD in PDF format for all components
Find more here
show contacts
Contact us at
show contacts